HPSM13K intelligent monitoring device is designed to meet the needs of users of conventional integrated AC / DC system of a medium-sized monitoring, it is mainly applied to 65AH~1000Ah single charge system, to achieve a variety of data acquisition by extending the signal acquisition unit, through the RS485 interface with the remote control center platform online, unattended computer room, achieve up to 120 sections battery patrol and 160 road 160 Road branch insulation monitoring circuit can switch the monitoring system. The monitor is characterized by a combination of 7 Inch Touch screen and expansion unit, with high performance price ratio, simple wiring and convenient installation.

1. product features

1) easy to install, simple to use, high cost performance;

2) at the same time, it has RS485\CAN interface, supports a variety of communication protocols, and fully realizes the "four remote" function.

3) 7 Inch Touch screen to realize the visual operation of man-machine interface, the whole Chinese menu, easy to operate and easy to handle.

4) perfect alarm processing and recording functions, which can be recorded by the current fault and historical fault.

5) the user can configure the system flexibly according to the requirements of the actual project, including the insulation of the integrated acquisition unit and the detection and reuse of the switch quantity.

6) according to the different requirements of the system, the RS485 bus can expand the AC detection unit, DC detection unit, battery detection unit, insulation monitoring unit and switch quantity detection unit.

7) it can be used with the modules of various manufacturers.

8) it can communicate with the DC/DC converter and the DC/AC inverter.

2. function introduction

1) the intelligent battery charging management function, the response time is fast, the current limiting value is stable, and the battery life is prolonged.

2) perfect remote communication function, realize "four remote" function through CAN/RS485 interface, and realize unmanned duty.

3) perfect alarm processing and recording function, when the system is abnormal, the monitoring automatically generates acoustooptic alarm, fault output node action

4) the user can query the system fault through the current fault and the history fault;

5) the scene (or remote) set the system parameters, upper and lower alarm limit, the manual switch control float conversion module;

6) monitoring the voltage and current of each DC feed output, the status of each feed output switch, fuse state, insulation status and lightning arrester state. When abnormal conditions occur, sound and light alarm is issued.

7) two ways of automatic switching of three-phase AC, AC voltage, current, power, frequency and other detection, overvoltage, undervoltage, lack of phase, blackout alarm;

8) the switch quantity detection unit can be expanded through the RS485 interface according to the users needs, with up to 160 paths (with 4 switch detection units).

9) a maximum of 120 battery patrolling (with 5 battery patrol units) can be extended through the RS485 interface according to the users requirements.

10) the insulation detection unit can be expanded through the RS485 interface according to the users needs, with up to 160 roads (with 4 insulation detection units).

11) the automatic voltage regulating control function of the silicon chain can control the 5 and 7 grade silicon chains (the default is the five grade silicon chain).